Brand new heater element compatible with the GHD MS4.0 and MS5 models. This heater measures 7mm x 70mm. Comes fitted with ring crimps and roughly 40mm of wire.

Please note on some older MS4 irons the original element may have 80 ohms printed on it. These are 70 ohms but it makes no difference.

For more details about GHD heater elements, please see our heaters page. These instructions are also basically correct for all models of GHD, however the parts may look slightly different.

We recommend renewing the thermal paste when fitting a new element. This is available as an extra with this item for £1.10

All heater resistance values are nominal. Heater resistances can vary plus/minus 10 ohms however this is normal and does not affect operation.

We now offer an Element Repair Service for all elements where one or both wires have broken off.