Business as usual over Christmas

The Christmas break will soon be upon us, but don't worry if you need our products or services - we will be operating as normal throughout the Christmas period. So we'll be dispatching orders and carrying out repairs. Although we might take a quick break from the workshop for some Christmas dinner :-)

Brand new heater element compatible with the GHD MS4.0 and MS5 models. This heater measures 7mm x 70mm. Comes fitted with ring crimps and roughly 40mm of wire.

Please note on some older MS4 irons the original element may have 80 ohms printed on it. These are 70 ohms but it makes no difference.

For more details about GHD heater elements, please see our heaters page. These instructions are also basically correct for all models of GHD, however the parts may look slightly different.

We recommend renewing the thermal paste when fitting a new element. This is available as an extra with this item for £1.10

All heater resistance values are nominal. Heater resistances can vary plus/minus 10 ohms however this is normal and does not affect operation.

We now offer an Element Repair Service for all elements where one or both wires have broken off.

If you do purchase an element from us please consider sending us your old element, we will issue you with a £5 discount voucher for any future purchase from our shop.

Heater
Resistance	80 ohms
Width	7 mm
With Thermistor	No

Write a review

Your Name

Your Review

Note: HTML is not translated!

Rating Bad Good

Captcha

Please complete the captcha validation below

70 Ohm Narrow Heater Element

Brand: Compatible Part
Product Code: 70NewNarrowHeater

Availability: In Stock
Number sold: 263

7.70
£7.70

Available Options

Heater Extras

With Thermal Paste (+£2.00)

Qty

1 reviews / Write a review

Short URL for this page: