Business as usual over Christmas

The Christmas break will soon be upon us, but don't worry if you need our products or services - we will be operating as normal throughout the Christmas period. So we'll be dispatching orders and carrying out repairs. Although we might take a quick break from the workshop for some Christmas dinner :-)

Brand new narrow 80ohm heater element with thermistor. This heater is 7mm wide. Suitable for MS4.0 and MS5.0 narrow irons.

For more details about GHD heater elements, please see our heaters page. These instructions are also basically correct for all models of GHD, however the parts may look slightly different.

You must renew the thermal paste when fitting a new element. This is available as an extra with this item for £1.10

All heater resistance values are nominal. Heater resistances can vary plus/minus 10 ohms however this is normal and does not affect operation.

The actual value of this item is usually around 70 ohms.

Please watch our video below where we show how to solder the themistors wires to the PCB and also show you how to replace just the thermistor if required.

We now offer an Element Repair Service for all elements where one or both wires have broken off.

If you do purchase an element from us please consider sending us your old element, we will issue you with a £5 discount voucher for any future purchase from our shop.

Heater
Resistance	80 ohm
Width	7 mm
With Thermistor	Yes

Write a review

Your Name

Your Review

Note: HTML is not translated!

Rating Bad Good

Captcha

Please complete the captcha validation below

80ohm Narrow Heater Element with Thermistor

Brand: Compatible Part
Product Code: 80NewNarrowHeaterThermistor

Availability: In Stock
Number sold: 44

15.00
£15.00

Available Options

Heater Extras

With Thermal Paste (+£2.00)

With Solder (+£3.00)

Qty

0 reviews / Write a review

Short URL for this page: